The following STL files were designed for the Ronin Mk1 and Ronin Mk1.5 are available for download.
Landing Skids
The landing skids come in two versions with one having 1mm of clearance for the mounting screws and the other 2mm to ensure that longer screws remain clear of the motor coils. Both landing skids provide 6mm total clearance or around 2mm of clearance from the head of the brace plate screws. The landing skids should be printed in PLA at a minimum 60% infill.
VTX Antenna Tail Guide
The guide helps to keep the VTX antenna oriented in a semi upright position at the tail for optimal signal reception. The guide mounts to the rear two standoffs. It should be printed in TPU with a minimum of 60% infill.
Mini Immortal T Antenna Tail Mount
The mount holds a Mini Immortal T antenna in place at the base of the tail clear from the carbon fiber of the bottom plate. The mount is secured to the rear two standoffs. It should be printed in TPU with a minimum of 60% infill.
XM Plus Antenna Guide
The guide serves to orient XM Plus diversity antennas at an optimal 90 degree angle at the tail. The diversity antennas are heat-shrinked to the leads to keep them in place. The guide mounts to the rear two standoffs. It should be printed in TPU with a minimum of 60% infill.
Ronin Mk1 & Mk1.5 STL Files
Updated on February 15, 2022
The following STL files were designed for the Ronin Mk1 and Ronin Mk1.5 are available for download.
Landing Skids
The landing skids come in two versions with one having 1mm of clearance for the mounting screws and the other 2mm to ensure that longer screws remain clear of the motor coils. Both landing skids provide 6mm total clearance or around 2mm of clearance from the head of the brace plate screws. The landing skids should be printed in PLA at a minimum 60% infill.
VTX Antenna Tail Guide
The guide helps to keep the VTX antenna oriented in a semi upright position at the tail for optimal signal reception. The guide mounts to the rear two standoffs. It should be printed in TPU with a minimum of 60% infill.
Mini Immortal T Antenna Tail Mount
The mount holds a Mini Immortal T antenna in place at the base of the tail clear from the carbon fiber of the bottom plate. The mount is secured to the rear two standoffs. It should be printed in TPU with a minimum of 60% infill.
XM Plus Antenna Guide
The guide serves to orient XM Plus diversity antennas at an optimal 90 degree angle at the tail. The diversity antennas are heat-shrinked to the leads to keep them in place. The guide mounts to the rear two standoffs. It should be printed in TPU with a minimum of 60% infill.