Shinobi Mk1

Class:  Shinobi

Our endurance class of FPV frames is called the Shinobi.  Translated as “one who endures,” the shinobi warrior class of feudal Japan were specialists in clandestine and unconventional warfare.  The Shinobi leverages the sub-250g frame design to maximize flight time while maintaining flight performance.

Version:  Mk1

Boasting a solid-body design for the optimal sub-250g endurance build, the frame weighs only 35g including lipo pad and hardware.  In addition to a 2.5mm main plate thickness, motor vibrations are further mitigated with 4mm wide side sway bars.  The top plate is 1.5mm thick.  All carbon fiber parts are cut from Toray T300 3K Twill matte black carbon fiber sheets.

Frame Weight:  35g
Propeller Size:  4 inches
Wheelbase:  177mm MTM
Frame Configuration:  Deadcat
Motor Mounting:  12mm, 9mm
Front Stack Mounting:  25.5×25.5mm, 20x20mm, 16x16mm
Rear Stack Mounting:  20x20mm, 16x16mm
Stack Clearance:  20mm
FPV Camera Mounting:  19x19mm (20mm clearance)

Recommended sub-250g components for long range (10+ min flight time):

• 140X 2500-3000KV motors
• Bi-blade 4″ propellers
• 1100mAh 3S or 4S XT30 lipo (70-110g)
• AIO Whoop FC
• HDZero or DJI; split HD camera; Insta360 Go; Naked GoPro (20-30g)

Recommended sub-250g components for cinematic (5-7 min flight time):

• 150X 3500-4000KV motors
• Bi- or tri-blade 4″ propellers
• 700mAh 4S XT30 lipo (approx 80g)
• AIO Whoop FC
• HDZero or DJI; split HD camera; Insta360 Go; Naked GoPro (20-30g)

Contents

1x  Shinobi Mk1 Main Plate (2.5mm thickness)
1x  Shinobi Mk1 Top Plate (1.5mm)
2x  Shinobi Mk1 Camera Plates (1mm inner and 1.5mm outer)
1x  Ronin Mk1.5 Lipo Pad (2mm)
1x  Seppuku Lipo Strap (16mmx180mm)
Shinobi Mk1 Hardware:
10x  M2x6mm Button Head Screws
6x  M2x8mm Button Head Screws
7x  M2x20mm Black Knurled Aluminum Standoffs

Fitment

Assembly

Resources